As per manufacturer's written instructions (7)
complete with necessary appurtenances including fasteners and instructions (0)
Cover and protect masonry units from precipitation (0)
Cover bars to be stored longer than 12 hours at the job site with opaque polyethylene sheeting or other suitable equivalent protective material (1)
Deliver cementitious and other packaged materials in unopened containers,plainly marked and labeled with manufacturers' names and brands (0)
Deliver construction master keys with the locks (0)
Deliver hardware in original individual containers (0)
Deliver permanent keys and removable cores to the employer by certified method (0)
Deliver products to the site in unopened containers labeled plainly with manufacturers' names and brands (0)
Deliver sealants in the manufacturer's original unopened containers (1)
Deliver windows to the project site in an undamaged condition (0)
Deliver, store, handle, and protect material to avoid chipping, breakage, and contact with soil or contaminating material (0)
Do not deliver concrete until vapor retarder, vapor barrier, forms, reinforcement, embedded items, and chamfer strips are in place and ready for concrete placement (1)
Do not drop or drag bars or bundles (1)
Do not remove units from cartons until cartons are placed on scaffolds or in the location where units are to be laid (0)
Do not stack pallets, Handle cementitious materials in a manner that will prevent the inclusion of foreign materials and damage by water or dampness (0)
Do not store concrete curing compounds or sealers in occupied spaces (1)
Do not store concrete curing compounds or sealers with materials that have a high capacity to adsorb volatile organic compound (VOC) emissions (1)
Ensure bar sizes can be accurately identified after bundles are broken and tags removed (1)
Follow ACI 301, ACI 304R and ASTM A934/A934M requirements and recommendations (1)
Handle and install materials in a manner that will protect them from damage (0)
Keep fiber voids dry until installed and overlaid with concrete (1)
Lift bundled coated bars with strong back, multiple supports, or platform bridge to prevent sagging and abrasion (1)
Maintain steel reinforcing bars and uncoated ties free of loose mill scale and loose rust (0)
Mark each individual container with item number as shown on hardware schedule (0)
Mark prefabricated lintels on top sides to show the lintel schedule number (0)
Pack glazed brick, glazed structural clay tile, and prefaced concrete masonry units in the manufacturer's standard paper cartons, trays, or shrink wrapped pallets with a divider between each unit (0)
Pad bundling bands where in contact with bars (1)
Protect finished surfaces during shipping and handling using the manufacturer's standard method (0)
Protect from contaminants such as grease, oil, and dirt (1)
Protect from direct sunlight and weather (1)
Protect material delivered and placed in storage off the ground from moisture, dirt, and other contaminants (1)
Provide new units if windows cannot be repaired (0)
Provide systems for handling coated bars which have padded contact areas such as, nylon slings, all free of dirt and grit (1)
Remove sealants from the site whose shelf life has expired (1)
Repair damaged windows to an "as new" condition as approved (0)
Space the dunnage close enough to prevent excessive sags (1)
Stack large quantities of straight bars with adequate protective blocking between layers. Schedule deliveries of epoxy coated bars to the job site to avoid the need for long term storage (1)
Store and prepare materials in already disturbed areas to minimize project site disturbance and size of project site (0)
Store cementitious material in dry, weather-tight enclosures or completely cover (0)
Store coated bars both in shop and in field, above ground, on wooden or padded cribbing (1)
Store fiber voids above ground level in a dry location (1)
Store glass and setting materials in safe, enclosed dry locations and do not unpack until needed for installation (0)
Store reinforcement and accessories off the ground on platforms, skids, or other supports (1)
Store reinforcement of different sizes and shapes in separate piles or racks raised above the ground to avoid excessive rusting (1)
Store sand and aggregates in a manner to prevent contamination and segregation (0)
Store steel reinforcing bars, coated anchors, ties, and joint reinforcement above the ground (0)
Store windows and components out of contact with the ground, under a weathertight covering, to prevent bending, warping, or otherwise damaging the windows (0)
Store windows and components so they will not have to be handled at -28 degrees C (20 degrees F) or colder (0)
Use care in handling and hoisting windows during transportation and at the job site (0)
